Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chrysler >> 2005 >> 300 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 343 (Overhead Console (Service Information)) >> Overhead Console - Service Information >> Installation

Overhead Console - Service Information: Installation

WARNING: This page is about a different car, the 2005 Dodge Pickup and 2005 Dodge Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the overhead console in the vehicle.
  2. Connect the Electronic Overhead Module and the reading/courtesy lamps electrical connectors.
  3. Grasp the sides of the overhead console and push straight up evenly to engage the two snap clips at the rear of the unit.
  4. Install the overhead console retaining screws, located in the sunglass storage bin. Torque the screws to 1.2 N.m (10 in. lbs.).
  5. Connect the battery negative cable.
scientia non olet · About Mike's Workshop Manuals