Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chrysler >> 2005 >> 300 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 246 (HVAC Systems - Controls - Front) >> Blower Motor Resistor Block >> Installation

Blower Motor Resistor Block: Installation

WARNING: This page is about a different car, the 2004 Dodge Grand Caravan, 2004 Dodge Caravan, and 2004 Chrysler Town & Country. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the blower motor resistor block into the HVAC housing.
  2. Install the two screws that secure the blower motor resistor block to the HVAC housing. Tighten the screws to 2 N.m (17 in. lbs.).
  3. Connect the two wire connectors to the resistor block.
  4. Install the glove box (Refer to GLOVE BOX ).
  5. Reconnect the battery negative cable.
scientia non olet · About Mike's Workshop Manuals