Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chrysler >> 2004 >> Pacifica AWD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 3.5L Engine (Service Information) >> Oil Pressure Sensor/Switch >> Removal

Oil Pressure Sensor/Switch: Removal

  1. Raise vehicle on hoist.
  2. Position an oil collecting container under switch location.
  3. Disconnect electrical connector.
  4. Unscrew oil pressure switch from oil filter adapter (Fig 1 ).
    Fig 1: Locating Engine Oil Cooler and Filter Adapter
    G03572582Courtesy of DAIMLERCHRYSLER CORP.
scientia non olet · About Mike's Workshop Manuals