Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chrysler >> 2004 >> Pacifica AWD >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System >> Wheel Speed Sensor Rear >> Removal

Wheel Speed Sensor Rear: Removal

  1. Access and remove rear hub and bearing from vehicle. (Refer to SUSPENSION REAR ).
    CAUTION: Prior to removal, clean area around sensor head to help prevent contaminants from entering bearing when sensor head is removed.
  2. Remove screw fastening speed sensor head to hub and bearing (Figure ).
  3. Remove wheel speed sensor from hub and bearing.
scientia non olet · About Mike's Workshop Manuals