Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chrysler >> 2004 >> Intrepid SXT >> Repair and Diagnosis >> Accessories & Equipment >> Wiper/Washer Systems >> Wiper System & Washer System >> Washer Fluid Level Switch - Intrepid >> Removal

Washer Fluid Level Switch - Intrepid: Removal

  1. Open hood and disconnect the negative battery cable remote terminal from the remote battery post.
  2. Remove the Washer Reservoir. Refer to WASHER RESERVOIR  .
  3. Gently pry sensor away from reservoir and out of grommet. Care must be taken not to puncture reservoir (Figure ).
  4. Remover rubber grommet from reservoir and throw away.
scientia non olet · About Mike's Workshop Manuals