Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chrysler >> 2004 >> Intrepid SE >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (3.5L Engine (Service Information)) >> Rocker Arm / Adjuster Assembly >> Assembly

Rocker Arm / Adjuster Assembly: Assembly

WARNING: This page is about a different variant/trim than selected.
CAUTION: New dowel pins must be installed when reassembling.
  1. Install the rocker arms, and pedestals onto the shaft.
  2. Install dowel pins (Fig 1 ). Dowel pins pass through the pedestal into the exhaust rocker shafts. Dowel pins should be pressed in until they bottom-out against the rocker shaft in the pedestal.
    Fig 1: Assemble Rocker Arms and Shaft
    G03511928Courtesy of DAIMLERCHRYSLER CORP.
  3. Install rocker arm and shafts. (Refer to INSTALLATION  )
scientia non olet · About Mike's Workshop Manuals