Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chrysler >> 2004 >> Crossfire Standard >> Repair and Diagnosis >> Transmission >> Manual Trans >> Manual Transmission - Servicing & Overhaul >> Transmission Front Section >> Assembly

Transmission Front Section: Assembly

  1. Drive in the sleeves (6) using a mallet.
  2. Install the shift shaft bearing (1).
    3. NOTE: The input and counter shaft bearings must be fully seated before installing the locking plates.
  3. Install the input shaft bearing (2) and the countershaft bearing (3).
  4. Install the locking plates (5) and bolts (4). Tighten the bolts to 9 N.m (7 ft. lbs.).
  5. Assemble the front and rear transmission sections. See GEARTRAIN HOUSING .
  6. Install the transmission. See MANUAL - REMOVAL & INSTALLATION article.
scientia non olet · About Mike's Workshop Manuals