Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chrysler >> 2004 >> Crossfire Standard >> Repair and Diagnosis >> Transmission >> Manual Trans >> Manual Transmission - Servicing & Overhaul >> Detent Plug >> Installation

Detent Plug: Installation

  1. Smooth any burrs or nicks in the detent plug bore.
  2. Use a plastic mallet to drive in and fully seat the detent plug (1).
    Fig 1: Seating Detent Plug
    G01859790Courtesy of DAIMLERCHRYSLER CORP.
  3. Remove the transmission from the holding fixture.
  4. Install the transmission in the vehicle. See MANUAL - REMOVAL & INSTALLATION article.
scientia non olet · About Mike's Workshop Manuals