Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chrysler >> 2004 >> Crossfire Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Electrical Diagnostics >> Diagnosis And Testing >> DTC P0116: Engine Coolant Temperature Sensor Performance >> Diagnostic Test >> 1. Pre-Diagnostic Check Out

1. Pre-Diagnostic Check Out

NOTE: Low engine coolant level can be the cause of this DTC. If the fluid level is low locate and repair any leaks before diagnosing this DTC.
NOTE: Always perform diagnostics with a fully charged battery.
NOTE: Check connectors - Clean/repair as necessary. Poor pin to terminal connections can set DTCs.
NOTE: Check for applicable TSBs.

Turn the ignition on.

With the DRB III(R), read DTCs.

Using the wiring diagram/schematic as a guide, inspect the wiring and connectors. Repair as necessary.

Perform this procedure prior to symptom diagnosis. 

Continue 

Go To 2

scientia non olet · About Mike's Workshop Manuals