Programming Unsuccessful

If ignition key programming is unsuccessful, the DRBIII® scan tool will display one of the following messages.

• Programming Not Attempted
  
  The DRBIII® scan tool attempts to read the programmed key status and there are no keys programmed into SKIM memory.
• Programming Key Failed
  
  Possibly used key from wrong vehicle.
  1. SKIM is unable to program key due to one of the following.
     • Faulty ignition key transponder.
     • Ignition key is programmed to another vehicle.
• Keys Already Learned, Programming Not Done
  
  SKIM transponder ID memory is full.
  1. Obtain ignition keys to be programmed from customer (8 keys maximum).
  2. Using the DRBIII® scan tool, erase all ignition keys by selecting MISCELLANEOUS and ERASE ALL CURRENT IGN. KEYS.
  3. Program all ignition keys.
• Learned Key In Ignition
  
  Ignition key transponder ID is currently programmed in SKIM memory.