Service Specifications
DISC BRAKE SPECIFICATIONS
| Application | In. (mm) | |||
|---|---|---|---|---|
| Caliper Bore Diameter | (1) | |||
| Disc Diameter | (1) | |||
| Lateral Runout | .005 (.13) | |||
| Parallelism (Maximum Thickness Difference) | ||||
| Front | .0004 (.011) | |||
| Rear | .0005 (.013) | |||
| Original Thickness | ||||
| Front | .902-.909 (22.91-23.10) | |||
| Rear | .344-.364 (8.75-9.25) | |||
| Minimum Refinish Thickness | ||||
| Front | .843 (21.4) | |||
| Rear | .285 (7.25) | |||
| Master Cylinder Bore Diameter | .937 x 1.34 (23.82 x 34.0) | |||
|
||||