Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chrysler >> 2002 >> Voyager Base, 2.4 B >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Anti-Theft Systems >> Remote Keyless Entry Systems >> Removal & Installation >> Remote Keyless Entry Module >> Removal & Installation

Removal & Installation

  1. Disconnect and isolate the battery negative cable.
  2. Remove instrument panel top cover. See Fig 1.
  3. Remove screws holding RKE module to instrument panel.
  4. Disconnect wire connector from RKE module. See Figure.
  5. Remove the RKE module from vehicle.
  6. To install, reverse removal procedure.
Fig 1: Removing Instrument Panel Top Cover
G95I35467Courtesy of DAIMLERCHRYSLER CORP.
scientia non olet · About Mike's Workshop Manuals