Mike's Workshop Manuals: Service manuals for every vehicle

Home >> Chrysler >> 2002 >> Prowler >> Repair and Diagnosis >> Engine Performance >> System >> Powertrain Diagnostic Procedures >> Diagnostic Information And Procedures >> Communication - Diagnostic Tests >> P1695-No CCD/J1850 Message From Body Control Module >> When Monitored and Set Condition

When Monitored and Set Condition

When Monitored: With the ignition on. Battery voltage greater than 10.0 volts.

Set Condition: No BUS messages received from the BCM for 20 seconds.

scientia non olet · About Mike's Workshop Manuals