Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chrysler >> 2002 >> PT Cruiser Base, Standard >> Repair and Diagnosis >> Body & Frame >> Body, Cab Control Systems >> Body Control Modules >> System Tests >> Vehicle Theft Security System (VTSS) >> Horn Fails To Sound During Alarm

Horn Fails To Sound During Alarm

NOTE: After making any repairs, perform BODY VERIFICATION TEST  under VERIFICATION TESTS.

Ensure the horn is operational from the horn switch before proceeding. If the horn does not work properly, repair the horn circuit as necessary. Disconnect the remote keyless entry module connector. See Figure. Connect one end of a jumper wire to the horn relay control circuit in the RKE connector. Momentarily touch the other end of the jumper wire to ground. If the horn sounded when the jumper wire was attached, replace the remote keyless entry module. If the horn did not sound when the jumper wire was attached, repair the horn relay control circuit for an open. Perform VTSS VERIFICATION TEST  under VERIFICATION TESTS.

scientia non olet · About Mike's Workshop Manuals