Mode 1

MODE 1 clears soft limits and sets memory selector switches ("1" and "2") to default settings. To enter mode 1, press and hold "S" and "1" buttons for 5 seconds. MODE 1 will exit when tasks are completed or when RKE data input circuit is grounded (transmission is shifted out of Park). MODE 1 will:

• Clear all soft limits to their default hard limit values.
• Default memory 1 to full back, full down front, full down back and recliner full back.
• Default memory 2 to full forward, full up front, full up back and recliner full forward.