Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chrysler >> 2001 >> Intrepid Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 5 (Air Bag Restraint Systems) >> Removal & Installation >> Occupant Restraint Controller/Air Bag Control Module (Orc/ACM) >> Installation Vehicle

Installation Vehicle

WARNING: This page is about a different car, the 2000 Dodge Intrepid, 2000 Chrysler LHS, 2000 Chrysler Intrepid, 2000 Chrysler Concorde, and 2000 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position ORC/ACM with top arrow pointing toward front of vehicle. Install ORC/ACM into instrument panel bracket clip. Tighten mounting screws to specification. See TORQUE SPECIFICATIONS  .
  2. To complete installation, reverse removal procedure. DO NOT connect battery at this time. Go to AIR BAG SYSTEM CHECK  under SYSTEM OPERATION CHECK.
NOTE: On Concord, instrument panel must be removed.
scientia non olet · About Mike's Workshop Manuals