Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chrysler >> 2001 >> Intrepid Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 5 (Air Bag Restraint Systems) >> Disabling & Activating Air Bag System >> Disabling System

Disabling System

WARNING: This page is about a different car, the 2000 Dodge Intrepid, 2000 Chrysler LHS, 2000 Chrysler Intrepid, 2000 Chrysler Concorde, and 2000 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
  1. To disable air bag system for repairs, ensure ignition switch is in OFF position. Disconnect and shield negative battery cable remote terminal located near right strut tower. Also, disconnect any auxiliary batteries or power supplies (if equipped). After disconnecting negative battery cable, wait at least 2 minutes for reserve capacitor to discharge before servicing air bag system.
scientia non olet · About Mike's Workshop Manuals