Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chrysler >> 2000 >> Voyager Base, 3.3 R >> Repair and Diagnosis >> Body & Frame >> Body, Cab Control Systems >> Body Control Modules >> System Tests >> Power Door Locks/RKE System >> Passenger's Door Unlock Switch Failure

Passenger's Door Unlock Switch Failure

  1. Using scan tool, clear any diagnostic trouble codes. Using scan tool, read passenger's door zone switch voltage. If PASSENGER'S DOOR ZONE SWITCH voltage is about one volt, replace passenger's door lock switch. If PASSENGER'S DOOR ZONE SWITCH voltage is not about one volt, go to next step.
  2. Operate passenger's door lock switch to unlock position and observe passenger's door zone switch voltage on scan tool. Do not hold switch in unlock position for more than 7 seconds or code will set. If PASSENGER'S DOOR ZONE SWITCH voltage is about one volt, go to next step. If PASSENGER'S DOOR ZONE SWITCH voltage is not about one volt, replace passenger's door lock switch.
  3. Operate passenger's door lock switch several times from lock to unlock position. Release switch. With switch in neutral position, observe scan tool voltage. If PASSENGER'S DOOR ZONE SWITCH voltage is about 5 volts, system is functioning properly at this time. Fault may be intermittent. If PASSENGER'S DOOR ZONE SWITCH voltage is not about 5 volts, replace passenger's door lock switch.
scientia non olet · About Mike's Workshop Manuals