Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chrysler >> 2000 >> Voyager Base, 2.4 B >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Tests W/Codes >> Diagnostic Tests >> Test VER-5A2: Fuel Rich/Lean Or Misfire Verification >> Final Procedure

Final Procedure

  1. Inspect vehicle to ensure all components related to the repair are properly connected. Reassemble and reconnect components as necessary. If all DTCs have been diagnosed and repaired, go to next step. If any DTCs have not been diagnosed, perform appropriate DTC test and finish diagnosing remaining DTCs as necessary.
  2. Using scan tool, monitor the similar conditions and attempt to duplicate conditions that vehicle was operating at when DTC was set. If OBD-II monitor fails, repaired DTC has reset, or any DTCs exist, repair is not complete. Check for related Technical Service Bulletins (TSBs) and proceed to appropriate DTC test. If OBD-II monitor runs and GLOBAL GOOD TRIP counter changes to one or more, condition is no longer present. If no DTCs exists and all components function properly, repair is complete.
scientia non olet · About Mike's Workshop Manuals