Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chrysler >> 2000 >> Sebring Limited >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Self-Diagnostics - Convertible >> Diagnostic Tests >> Test VER-1A: No Start Verification >> Final Procedure

Final Procedure

  1. Inspect vehicle to ensure all engine components are connected. Reassemble and reconnect components as necessary. Inspect engine oil for fuel contamination. Change engine oil and filter if engine oil is contaminated.
  2. Attempt to start engine. If engine starts, test is complete. If engine does not start, check for related Technical Service Bulletins (TSBs) and return to TEST NS-SEL: NO START TEST SELECTION  for additional testing.
scientia non olet · About Mike's Workshop Manuals