Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chrysler >> 2000 >> Intrepid Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 95 (Lighting Systems - Exterior) >> Headlamp Unit >> Standard Procedure >> Standard Procedure - Headlamp Unit Alignment - Export >> Vehicle Preparation For Headlamp Unit Alignment

Vehicle Preparation For Headlamp Unit Alignment

WARNING: This page is about a different car, the 2004 Dodge Intrepid, 2004 Chrysler Intrepid, 2004 Chrysler Concorde, and 2004 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
  1. Verify the headlamp switch is in the low beam setting.
  2. If the vehicle is equipped with a headlamp leveling system, be certain the headlamp leveling switch is in the "0" position.
  3. Correct defective components that could hinder proper headlamp alignment.
  4. Verify proper tire inflation.
  5. Clean headlamp lenses.
  6. Verify that luggage area is loaded as the vehicle is routinely used.
  7. Fuel tank should be FULL. Add 2.94 kg (6.5 lbs.) of weight over the fuel tank for each estimated gallon of missing fuel.
scientia non olet · About Mike's Workshop Manuals