Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chrysler >> 2000 >> Intrepid Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 144 (Chassis Diagnostic Procedures - Anti-Lock Brake System) >> System Description And Functional Operation >> Tire Pressure Monitoring System >> Diagnosing And Clearing System Faults

Diagnosing And Clearing System Faults

WARNING: This page is about a different car, the 2004 Dodge Intrepid, 2004 Chrysler Intrepid, 2004 Chrysler Concorde, and 2004 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.

All Tire Pressure Monitoring System Faults are specific to one location. If a "LOW BATTERY" fault is detected, the "TIRE SENSOR BAD/MISSING" message will be displayed. The appropriate sensor/transmitter can then be replaced.

If a single sensor/transmitter cannot be detected by the EVIC, replace that sensor transmitter. If none of the sensors/transmitters can be detected, refer to symptoms in the EVIC section.