Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chrysler >> 2000 >> Intrepid Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 13 (HVAC Systems - Manual) >> Removal & Installation >> A/C Heater Control >> Installation

A/C Heater Control: Installation

WARNING: This page is about a different car, the 2002 Dodge Intrepid, 2002 Chrysler Intrepid, and 2002 Chrysler Concorde. However, it is still accessible from the selected car via links, so may be relevant.
  1. Place the control into place on the back of the instrument panel center bezel and install the 6 retaining screws to the HVAC control.
  2. Connect the 2 electrical connectors to the back of the control head and traction control switch (if equipped). Install the instrument panel center bezel. Install the ash receiver assembly, if necessary.
  3. Connect the negative battery cable remote terminal to the remote battery post. To allow the BCM to learn the NEW control head, perform HVAC system calibration.
scientia non olet · About Mike's Workshop Manuals