Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chrysler >> 2000 >> Intrepid Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (Engine Controls - Service & Adjustment Specifications) >> Quick-Service >> Service Intervals & Specifications >> Drive Belt Adjustment - Pt Cruiser

Drive Belt Adjustment - Pt Cruiser

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2002 Dodge Viper, 2002 Dodge Stratus, 2002 Dodge Neon, 2002 Dodge Intrepid, and 2002 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
BELT ADJUSTMENT - PT CRUISER (Tension In Lbs. (kg) Using Belt Tension Gauge)

Application New Belt - Lbs. (Kg) (1) Used Belt - Lbs. (Kg)
A/C & Power Steering (2) (2)
Generator 135 (61) 100 (45.4)
(1) A used belt has more than 500 miles of service.
(2) Automatic belt tensioner is used and no adjustment is required.


BELT ADJUSTMENT - PT CRUISER (In Hertz Using DRBIII & Belt Tension Gauge Adapter)

Application (1) New Belt - Hz (1) Used Belt -Hz
Generator 235-247 207-217
(1) DRBIII and Belt Tension Gauge Adapter (8371) must be used to check belt tension frequency. For procedure on checking drive belt tension, see appropriate COOLING SYSTEM SPECIFICATIONS & DRIVE BELT ROUTING article in ENGINES.