Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chrysler >> 1998 >> Sebring Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (Cruise Control Systems) >> Self-Diagnostics Tests >> Test TC-87B: Speed Control Switch Always Low

Test TC-87B: Speed Control Switch Always Low

WARNING: This page is about a different car, the 1998 Plymouth Breeze, 1998 Dodge Stratus, and 1998 Chrysler Cirrus. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: For connector terminal identification, see CONNECTOR IDENTIFICATION  . For wiring diagram, refer to WIRING DIAGRAMS  .

Disconnect Powertrain Control Module (PCM) connector. Using an ohmmeter, check resistance of PCM connector terminal No. 41 between PCM connector and ground. See PCM CONNECTOR WIRE IDENTIFICATION table. If resistance is less than 5 ohms, repair short to ground on PCM connector terminal No. 41. Perform TEST SC-VER  . If resistance is 5 ohms or more, replace PCM. Perform TEST SC-VER  .

PCM CONNECTOR WIRE IDENTIFICATION

Application Wire Color
PCM Terminal No. 41 (Speed Control Switch Signal Circuit) Pink/Light Green
scientia non olet · About Mike's Workshop Manuals