VTSS Test 8A - Right Front Door Ajar
NOTE:
Perform VTSS TEST 1A
before proceeding with this test. For connector terminal identification, refer to CONNECTOR IDENTIFICATION
. For wiring diagrams, refer to WIRING DIAGRAMS
. Perform, after each repair, TEST VER-1A - VERIFICATION PROCEDURE
.
Ensure all doors are closed. Using scan tool read door ajar switch status. If scan tool displays DOOR AJAR: CLOSED, perform DOOR AJAR TEST 4A . If scan tool does not display DOOR AJAR: CLOSED, perform DOOR AJAR TEST 5A .