Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chrysler >> 1997 >> LHS >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Self-Diagnostics >> Test TC-15B - Speed Control Power Relay Circuit & Speed Control Solenoid Circuits

Test TC-15B - Speed Control Power Relay Circuit & Speed Control Solenoid Circuits

NOTE: For connector terminal identification, see CONNECTOR IDENTIFICATION . For wiring diagram, see WIRING DIAGRAMS .
  1. Using a ohmmeter, check resistance of switched Speed Control (SC) power supply circuit Dark Blue/Red wire between brake switch connector and SC servo connector. If resistance is 5 ohms or less, go to next step. If resistance is more than 5 ohms, repair open switched SC power supply circuit. Perform TEST SC-VER .
  2. Check brake switch adjustment. See appropriate article in the BRAKES section. If brake switch adjustment is okay, replace brake switch. Perform TEST SC-VER . If brake switch adjustment is not okay, adjust brake switch as necessary. Perform TEST SC-VER .
scientia non olet · About Mike's Workshop Manuals