Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chrysler >> 1996 >> Sebring LXi >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 20 (Cruise Control System - Convertible) >> Self-Diagnostics Tests >> Test TC-15B - Speed Control Power Relay Circuit & Speed Control Solenoid Circuits

Test TC-15B - Speed Control Power Relay Circuit & Speed Control Solenoid Circuits

WARNING: This page is about a different variant/trim than selected.
  1. Using an external ohmmeter, check resistance of switched Speed Control (SC) power supply circuit Dark Blue/Red wire between brake switch connector and SC servo connector. If resistance is 5 ohms or less, go to next step. If resistance is more than 5 ohms, repair open SC power supply circuit. Perform TEST SC-VER.
  2. Check brake switch adjustment. See BRAKE SWITCH under REMOVAL & INSTALLATION. If brake switch adjustment is okay, replace brake switch. Perform TEST SC-VER. If brake switch adjustment is not okay, adjust brake switch as necessary. Perform TEST SC-VER.
scientia non olet · About Mike's Workshop Manuals