Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chrysler >> 1996 >> Sebring LXi >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (Engine Controls - System & Component Testing - 2.0L) >> Fuel System >> Injectors

Fuel System: Injectors

WARNING: This page is about a different variant/trim than selected.

Turn ignition off. Disconnect injector electrical connector. Using a DVOM, measure resistance across injector terminals. See INJECTOR RESISTANCE table. If resistance is within specification, injector coils are okay. If resistance is not within specification, replace injector.

INJECTOR RESISTANCE

Application °F (°C) Ohms
DOHC 68 (20) 11-15
scientia non olet · About Mike's Workshop Manuals