All Doors Will Not Unlock Using Transmitter (1996 Models)
WARNING: This page is about a different car, the 1996 Plymouth Breeze, 1996 Dodge Stratus, and 1996 Chrysler Cirrus. However, it is still accessible from the selected car via links, so may be relevant.
- Unlock driver's door. Using voltmeter, backprobe BCM 20-pin connector. Check for a voltage pulse at terminal No. 4, while pressing UNLOCK button on transmitter. See Fig 1 . BCM is located on junction block, behind lower left corner of instrument panel. If there is no voltage pulse, replace BCM. See REMOVAL & INSTALLATION. If voltage pulse is present, repair circuit between BCM and driver's door lock motor. See appropriate wiring diagram in WIRING DIAGRAMS.
- Check for voltage pulse at terminals No. 1, 2 and 3 while pressing transmitter UNLOCK button twice within 5 second interval. If there is no voltage pulse, replace BCM. If voltage pulse is present, repair suspect circuit between appropriate BCM terminal and suspect door lock motor.