Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chrysler >> 1996 >> Sebring JXi >> Repair and Diagnosis >> Body & Frame >> Body, Cab Control Systems >> Body Control Computer - Convertible >> Diagnostic Charts >> Instrument Cluster Test 12D - Brake Warning Light

Instrument Cluster Test 12D - Brake Warning Light

NOTE: Perform INSTRUMENT CLUSTER TEST 12A before proceeding with this test. For connector terminal identification and wiring diagrams, see CONNECTOR IDENTIFICATION in appropriate BODY CONTROL COMPUTER section in this article. For wiring diagrams, see WIRING DIAGRAMS at the end of article. Perform TEST VER-1A after each repair.

Disconnect parking brake switch connector and ensure connector is clean and not damaged. Connect a jumper wire between parking brake switch connector and ground. If brake warning light illuminates, replace parking brake switch. If brake warning light does not illuminate, repair open Gray wire between parking brake switch and instrument cluster.

scientia non olet · About Mike's Workshop Manuals