Test 12A - Exterior Lamps On
NOTE:
For connector terminal identification, see CONNECTOR IDENTIFICATION
. For wiring diagram, see WIRING DIAGRAMS
. Perform TEST VER-1 after each repair.
- If an illumination problem exists, go to TEST 40A . If no illumination problem exists, open left front door. Using DRB, read left front door switch status. If DRB does not display LF DOOR AJAR : CLOSED, go to TEST 65A . If DRB displays LF DOOR AJAR : CLOSED, go to next step.
- Close left front door. Using DRB, read left front door switch status. If DRB does not display LF DOOR AJAR : OPEN, go to TEST 65B . If DRB displays LF DOOR AJAR : OPEN, replace body control module.