Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chrysler >> 1994 >> LHS >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (Engine Controls - Tests W/Codes - Body Control Computer) >> Diagnostic Procedure >> Entering On-Board Diagnostics >> DRB-II Continuity Meter Mode

DRB-II Continuity Meter Mode

WARNING: This page is about a different car, the 1993 Eagle Vision, 1993 Dodge Intrepid, and 1993 Chrysler Concorde. However, it is still accessible from the selected car via links, so may be relevant.

Press VOLT/OHM key 3 times. Display will read NO CONTINUITY. Touch test probe to connector or wire to be measured. Read continuity on DRB-II display. When continuity testing is complete, press VOLT/OHM key once to exit continuity meter mode.

scientia non olet · About Mike's Workshop Manuals