Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chrysler >> 1994 >> LHS >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Tests W/Codes - 3.5L >> CODES/MESSAGES (Note: For DTC table, see TEST TC-1A under "Self-Diagnostic Tests.") >> Code 42

Code 42

DRB displays AUTO SHUTDOWN RELAY CONTROL CIRCUIT. Condition is: open or shorted condition detected in Auto Shutdown (ASD) relay circuit.



DRB displays NO ASD RELAY OUTPUT VOLTAGE AT PCM. Condition is: PCM did not detect Auto Shutdown (ASD) sense signal after grounding ASD relay.

scientia non olet · About Mike's Workshop Manuals