Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chrysler >> 1993 >> LeBaron GTC, 2D Convertible, Standard >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System - BENDIX-4 >> Diagnosis & Testing >> DRB-II Test Functions >> Entering DRB-II Main Menu

Entering DRB-II Main Menu

  1. Ensure ignition is off. Attach DRB-II to Chrysler Collision Detection (CCD) data link connector. Data link connector is located behind fuse access cover on lower section of dash panel, left of steering column. See Figure . Turn ignition switch to RUN position.
  2. All DRB-II character positions will glow and copyright information will appear on screen for a few seconds. DRB-II main menu will appear after a few seconds. If DRB-II screen is blank, NO RESPONSE message is displayed, or any error messages appear, refer to DRB-II PROBLEMS & ERROR MESSAGES  .
scientia non olet · About Mike's Workshop Manuals