Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chrysler >> 1985 >> Laser Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 68 (Servicing - A/T) >> Lubrication >> Checking Fluid Levels

Checking Fluid Levels

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 1989 Plymouth Sundance, 1989 Plymouth Reliant, 1989 Plymouth Horizon, 1989 Plymouth Acclaim, and 1989 Dodge Spirit. However, it is still accessible from the selected car via links, so may be relevant.
  1. With vehicle on level ground, apply parking brake and run engine at curb idle for at least 60 seconds. Gear selector through all positons, ending in Park.
  2. Fluid level should be in crosshatch area of dipstick marked "WARM" or "HOT", depending on fluid temperature. Check condition of fluid for contamination or burnt smell. Do not overfill. Fully seat dipstick.
scientia non olet · About Mike's Workshop Manuals