Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chrysler >> 1982 >> Imperial >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (EGR Function Testing - CHRYSLER Trucks) >> EGR Function Testing - CHRYSLER Trucks >> Test 6 >> EGR System

EGR System

WARNING: This page does not describe the selected car, but rather 307 other vehicles, including the 2018 Jeep Grand Cherokee, 2018 Dodge Durango, 2017 Jeep Grand Cherokee, 2017 Dodge Durango, and 2016 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check vacuum hoses for correct routing. Warm engine to normal operating temperature. Engine coolant temperature must be greater than 150°F (65°C).
  2. Apply parking brake. Place transmission in Neutral with throttle in idle position. Suddenly increase engine RPM to 2000-3000 RPM, while noting movement of EGR valve stem. DO NOT exceed 3000 RPM.
  3. Valve stem in EGR valve should move when engine RPM is increased. Repeat test procedure several times to ensure correct operation. If valve stem does not move, check EGR system and vacuum supply.
scientia non olet · About Mike's Workshop Manuals