Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2025 >> Traverse Z71 >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls And Fuel - 2.5L (LK0) - Repair Instructions (1 Of 2) >> Repair Instructions (1 Of 2) >> Fuel Pump Power Control Module Replacement >> Installation Procedure

Installation Procedure

  1. GM4742938Courtesy of GENERAL MOTORS COMPANY

    Install Fuel Pump Power Control Module to Fuel Pump Power Control Module bracket as an assembly..

  2. Fuel Pump Power Control Module (2) - Install
  3. Connect the electrical connector.
    4. CAUTION:

    Refer to Fastener Caution .

  4. Fuel Pump Power Control Module Fastener (1) - Install and tighten [2x] - Fastener Specifications
  5. Install the retainers.
  6. Lowering the vehicle.


  1. GM4742912Courtesy of GENERAL MOTORS COMPANY

    Install Fuel Pump Power Control Module to Fuel Pump Power Control Module bracket as an assembly..

  2. Fuel Pump Power Control Module (2) - Install
    3. CAUTION:

    Refer to Fastener Caution .

  3. Fuel Pump Power Control Module Fastener (1) - Install and tighten [2x] - Fastener Specifications
  4. Connect the electrical connectors and install the wiring harness retainers as necessary.
  5. Lowering the vehicle.
scientia non olet · About Mike's Workshop Manuals