Circuit/System Verification
- Vehicle Power Mode state - Service/Run
- Verify no additional Headlamp/stop lamp related DTC(s) are set and the Headlamps/stop lamps otherwise function as expected. Refer to Headlamps Malfunction
, or Turn Signal Lamps and/or Indicators Malfunction
.
- If any additional Headlamp/stop lamp-related DTC(s) are set
- Go to next step: If no additional Headlamp/stop lamp-related DTC(s) are set
- Verify DTC U1015 is not set
- If DTC U1015 is set
Refer to: Circuit/System Testing
- Go to next step: If DTC U1015 is not set
- If DTC U1015 is set
- All OK.