Removal Procedure

Oil Filler Cap - Remove
Courtesy of GENERAL MOTORS COMPANY

Intake Manifold Cover (1) - Remove
Courtesy of GENERAL MOTORS COMPANY

NOTE:
To avoid small parts like bolts or retainers fallen into the engine, install the Oil Filler Cap.

Oil Filler Cap (1) - Install
Courtesy of GENERAL MOTORS COMPANY

Positive Crankcase Ventilation Fresh Air Tube (1) @ Air Cleaner Outlet Duct - Disconnect - Plastic Collar Quick Connect Fitting Service
Courtesy of GENERAL MOTORS COMPANY

Turbocharger Outlet Duct Front Clamp (1) - Loosen
Air Cleaner Outlet Duct Clamp (5) - Loosen
Air Cleaner Outlet Duct Bolt (2) - Remove [2x]
Air Cleaner Outlet Duct Nut (3) - Remove
Air Cleaner Outlet Duct (4) - Remove
Courtesy of GENERAL MOTORS COMPANY

Disconnect the electrical connector.
Intake Air Pressure and Temperature Sensor Bolt (1) - Remove
Intake Air Pressure and Temperature Sensor (2) - Remove