Removal Procedure
- Drain the cooling system. Cooling System Draining and Filling (GE 47716)
- Remove underbody panels as necessary. Underbody Panel Component Locator
Hose Clamp (3) - Disengage - Hose Clamp Replacement Guidelines - Spring Type
- Water Pump Inlet Hose (4) @ Water Pump Module - Remove
- Hose Clamp (5) - Disengage - Hose Clamp Replacement Guidelines - Spring Type
- Water Pump Inlet Hose (4) @ Engine Oil Cooler - Remove
Disconnect the electrical connector.
- Crankshaft Position Sensor Bolt (1) - Remove
- Crankshaft Position Sensor (2) - Remove