Removal Procedure
- Disable the SIR system. SIR Disabling and Enabling
Rear Seat Belt Buckle Bolt (3) - Remove
Body Rear Corner Upper Garnish Molding Cap (1) - Remove
- Body Rear Corner Upper Garnish Molding Bolt (2) - Remove
- Body Rear Corner Upper Garnish Molding (3) - Remove
Disconnect the electrical connector. (1)
Disconnect the liftgate power assist actuator harness grommet (1).
- Release the 2 metal clips at the ends of the liftgate power assist actuator (2).
- Liftgate Power Assist Actuator (2) - Remove