Removal Procedure

Disable the SIR system. SIR Disabling and Enabling
Courtesy of GENERAL MOTORS COMPANY

Using a flat-bladed plastic trim tool, release the retaining clips.
Front Floor Console Front Cover (1) - Remove
Courtesy of GENERAL MOTORS COMPANY

Front Floor Console Extension Panel Bolt (1) - Remove
Front Floor Console Extension Panel - Right Side (2) - Remove
Courtesy of GENERAL MOTORS COMPANY

Release the retaining tab.
Instrument Panel Wiring Harness Junction Block (1) - Remove
Disconnect the electrical connector.
Courtesy of GENERAL MOTORS COMPANY

Disconnect the electrical connectors.
Release the retaining tabs.
Serial Data Gateway Module (1) - Remove
Courtesy of GENERAL MOTORS COMPANY

Disconnect the electrical connectors.
Release the retaining tabs.
Body Control Module (1) - Remove
Courtesy of GENERAL MOTORS COMPANY

Air Conditioning Evaporator and Blower Module Drain Hose (1) - Remove
Courtesy of GENERAL MOTORS COMPANY

Front Floor Console Bolt Access Hole Cover (1) - Remove
Front Floor Console Extension Panel Bolt (2) - Remove
Using a flat-bladed plastic trim tool, release the retaining clips.
Front Floor Console Extension Panel - Left Side (3) - Remove
Courtesy of GENERAL MOTORS COMPANY

Release the retaining tabs.
Body Control Module Shield (1) - Remove
Courtesy of GENERAL MOTORS COMPANY

Release the retaining tabs.
Serial Data Gateway Bracket (1) - Remove
Courtesy of GENERAL MOTORS COMPANY

Release the retaining tab.
Disconnect the electrical connector.
Multifunction Power Supply Converter (1) Remove
Courtesy of GENERAL MOTORS COMPANY

Body Control Module Bracket Bolt (1) - Remove
Body Control Module Bracket Nut (2) - Remove [3x]
Courtesy of GENERAL MOTORS COMPANY

Disconnect the wiring harness retainers as necessary.
Body Control Module Bracket (1) - Remove