Barometric Pressure Sensor Replacement
WARNING: This page is about a different variant/trim than selected.
NOTE:
Callouts items in the following chart represent components shown in graphic above.
| Callout | Component Name |
|---|---|
| Preliminary Procedure Valve Rocker Arm Cover Insulator Replacement - Left Side (LT1) , or Valve Rocker Arm Cover Insulator Replacement - Left Side (LT4) |
|
| 1 | Electrical Connector |
| 2 | Barometric Pressure Sensor Bolt
CAUTION:
Refer to Fastener Caution . Tighten 9 N.m (80 lb in) |
| 3 | Barometric Pressure Sensor Procedure Inspect the O-ring and replace if necessary. |