Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2023 >> Bolt EV >> Repair and Diagnosis >> Brakes >> Traction Control >> Antilock Brake System >> Repair Instructions >> Brake Pressure Modulator Valve Bracket Replacement

Brake Pressure Modulator Valve Bracket Replacement

GM4581975Courtesy of GENERAL MOTORS COMPANY
NOTE: Callouts in the following chart represent components shown in graphic above.
Callout Component Name
Preliminary Procedure 
Electronic Brake Control Module with Brake Pressure Modulator Valve Replacement 
1 Brake Pressure Modulator Valve Insulator Nut [2x]
CAUTION:

Fastener Caution

Procedure

  1. Remove and DISCARD the nuts.
  2. Install the NEW nuts.

Tighten 
8 N.m (71 lb in)
2 Brake Pressure Modulator Valve Insulator Washer [2x]

Procedure

  1. Remove and DISCARD the washers.
  2. Install the NEW washers.
3 Brake Pressure Modulator Valve Insulator [2x]

Procedure

  1. Remove and DISCARD the Insulators.
  2. Install the NEW Insulators.
4 Brake Pressure Modulator Valve Bracket
5 Electronic Brake Control Module with Brake Pressure Modulator Valve
scientia non olet · About Mike's Workshop Manuals