Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2023 >> Blazer RS, FWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls And Fuel - 3.6L - Repair Instructions >> Repair Instructions >> Fuel Tank Replacement (AWD) >> Installation Procedure

Installation Procedure

  1. GM4298742Courtesy of GENERAL MOTORS COMPANY

    Place a suitable adjustable jack under the fuel tank.

  2. Fuel Tank (1) - Install
  3. GM4298741Courtesy of GENERAL MOTORS COMPANY

    Fuel Tank Strap (2) - Install [2x]

    4. CAUTION:

    Refer to Fastener Caution .

  4. Fuel Tank Strap Bolt (1) - Install and tighten [4x] 22 N.m (16 lb ft)
  5. GM4298739Courtesy of GENERAL MOTORS COMPANY

    Evaporative Emission Canister Vent Hose (2) - Connect - Plastic Collar Quick Connect Fitting Service 

  6. Fuel Pump Fuel Feed Hose (1) - Connect - Plastic Collar Quick Connect Fitting Service 
  7. GM4298736Courtesy of GENERAL MOTORS COMPANY

    Evaporative Emission Canister Vent Hose (4) - Connect - Plastic Collar Quick Connect Fitting Service 

  8. Fuel Tank Filler Hose (3) - Install
  9. Fuel Tank Filler Hose Clamp (2) - Tighten 4 N.m (35 lb in)
  10. Install the body wiring harness retainers as necessary.
  11. Wiring Harness (1) - Connect
  12. Driveline Torque Tube - Install - Driveline Torque Tube Replacement
  13. Refill the fuel tank.
  14. Inspect for fuel leaks.
scientia non olet · About Mike's Workshop Manuals