Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2022 >> Trailblazer L >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls And Fuel - 1.2L (LIH) - Repair Instructions >> Repair Instructions >> Fuel Feed Intermediate Pipe Replacement >> Installation Procedure

Installation Procedure

  1. GM5392490Courtesy of GENERAL MOTORS COMPANY

    Fuel Feed Intermediate Pipe (3) - Install NEW

  2. Fuel Feed Intermediate Pipe Nut (1) - Loosely install [2x]
  3. Fuel Feed Intermediate Pipe Bolt (2) - Install and tighten 8.5 N.m (75 lb in)
  4. Component Fastener Tightening Caution

    Fuel Feed Intermediate Pipe Nut (1) - Tighten 30 N.m (22 lb ft) [2x][2x]

  5. GM5392496Courtesy of GENERAL MOTORS COMPANY

    Fuel Pump Cover - Install - Fuel Pump Cover Replacement 

  6. Air Cleaner Assembly - Install - Air Cleaner Assembly Replacement 
  7. Inspect for fuel leaks using the following procedure:
    1. Turn ON the ignition with the engine OFF for 2 seconds.
    2. Turn OFF the ignition for 10 seconds.
    3. Turn ON the ignition with the engine OFF.
    4. Inspect for fuel leaks.