If Slow to Calibrate/Learn

The ideal calibration/learn condition is, driving on a two-lane divided highway with markings on both sides of the lane. One or more of the following conditions may increase the length of time required to complete the self-calibration/learn procedure:

• Heavy traffic
• Stop and go traffic
• Mountain roads
• Curves in roadway
• Poor contrast lane markings
• Botts' Dots or similar type lane markings
• Operating the vehicle at speeds greater than recommended
• Driving through snow or fog, or driving directly into the sun
• B174W Frontview Camera - Windshield is not properly installed. Verify it is snapped into tabs and is secure. Refer to Front View Camera Replacement .