Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2022 >> Corvette 2D Convertible >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Seat Belt System >> Diagnostic Information and Procedures >> DTC B1922 >> Circuit/System Verification

Circuit/System Verification

NOTE:

The condition may be intermittent. Refer to Testing for Intermittent Conditions and Poor Connections

  1. Ignition ON / Vehicle In Service Mode.
  2. Verify that DTC B1922 is not set as current.
    • If DTC B1922 is set as current 

      Refer to Circuit/System Testing.

    • Go to next step: If DTC B1922 is not set as current 
  3. A fault is not currently present and may be an intermittent condition.
scientia non olet · About Mike's Workshop Manuals