Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2021 >> Traverse L >> Repair and Diagnosis >> Steering >> Steering Column >> Steering Wheel And Column >> Repair Instructions >> Steering Column Lower Trim Cover Replacement (N38) >> Installation Procedure

Installation Procedure

  1. GM4751158Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Maneuver the steering column lower trim cover around the steering column tilt and telescoping lever as necessary.

    Position the steering column lower trim cover (2) on the steering column.

    Connect the electrical connector.

    2. CAUTION:

    Refer to Fastener Caution .

  2. Steering Column Lower Trim Cover Bolt (1) - Install and tighten 2.5 N.m (22 lb in)
  3. Turn the steering wheel approximately 90 degrees to the right of the centered position.
  4. GM4751157Courtesy of GENERAL MOTORS COMPANY

    Steering Column Lower Trim Cover Bolt (1) - Install and tighten 2.5 N.m (22 lb in)

  5. Turn the steering wheel approximately 90 degrees to the left of the centered position.
  6. GM4751156Courtesy of GENERAL MOTORS COMPANY

    Steering Column Lower Trim Cover Bolt (1) - Install and tighten 2.5 N.m (22 lb in)

  7. GM5121915Courtesy of GENERAL MOTORS COMPANY

    Install the Instrument Panel Trim Pad - Left Side (1) to the steering column lower trim cover. Instrument Panel Trim Pad Replacement - Left Side

  8. Turn the steering wheel to the centered position.
scientia non olet · About Mike's Workshop Manuals